Below is a typical format used in test report.
This can be txt or html.
LabVIEW has report gen tools.
Some Test reports can also in images (ex Scope captures images)
If you are using TestStand to create the Test Report you will most likely need to modify the Reportgen.seq and UUTInfo data type.
Although not show below the Test Completed Date,Time are sometimes included in the report.
For the Pass/Fail Column make a Failed test stand out for example “**Fail**”. This will make it easier to spot on the report.
LabVIEW and TestStand mention about are National Instruments Products.
Test Engineers Resource 